Standard Le-6-2040 industrial v-slot aluminum profile extrusion 6063 aluminium
Standard Le-6-2040 industrial v-slot aluminum profile extrusion 6063 aluminium
Product
|
Industrial aluminium profile
|
Material
|
6000series aluminium alloy
|
Temper
|
T3-T8
|
Surface treatment
|
Mill finish,powder coating, anodizing, wooden grain coating,polishing,eletrophoresis,PVDF, sanding blasting, etc.
|
Size
|
20series
|
Slot width
|
6MM,8MM
|
Length
|
6M
|
Unit weight
|
0.5-4KG/M
|
Appearance
|
Normally square,round and T-shaped,or customized
|
Color
|
Silver,black,blue,wood color,according to clients’ requirements.
|
Industrial aluminium profile is apply to frame combination structure,there is a round to transition on thecorner,with anodic oxidation surface treatment,elegant,beautiful and resistant to corrosion,it normally connected from inside with specialised bolt and spring fastener.
Standard Le-6-2040 industrial v-slot aluminum profile extrusion 6063 aluminium
Item:LE-6-2040
Material:Aluminium alloy 6063
Unit weight:0.93kg/m
MOQ:1kg
Material:Aluminium alloy 6063
Unit weight:0.93kg/m
MOQ:1kg
1.Industrial aluminium class: Frame construction, Loading platform, closed construction, production line, Civil aluminum frame.
2.Aluminium products: PA molding finishing, surface preparation, aluminium part using for car, motor, elevators, air cylinder and so on. Aluminium products and aluminium profiles using for decorating, advertisement, displaying, lamp house.
3.Stage film and television modeling: Main aluminium frame modeling, screen, predant lamp, audio supportframe,air box and special work table.
2.Aluminium products: PA molding finishing, surface preparation, aluminium part using for car, motor, elevators, air cylinder and so on. Aluminium products and aluminium profiles using for decorating, advertisement, displaying, lamp house.
3.Stage film and television modeling: Main aluminium frame modeling, screen, predant lamp, audio supportframe,air box and special work table.
1.The raw material is aluminium ingot;
2.Melting:Aluminium ingot melting through a high temperature,and then casting into aluminium bar.
3.Extruding:Open a mould according to the section design,and then press the heated aluminium bar intoaluminium profiles;
4.Anodizing:Under the corresponding electrolyte and specific process conditions, aluminum and its alloys form a layer of oxide film on aluminum products (anode) under the action of applied current. The oxide film has protective, decorative and some other functional properties.We can also do many kinds of other surface treatment.
5.Quality control:Strict standards on quality control to insure your benifits.
2.Melting:Aluminium ingot melting through a high temperature,and then casting into aluminium bar.
3.Extruding:Open a mould according to the section design,and then press the heated aluminium bar intoaluminium profiles;
4.Anodizing:Under the corresponding electrolyte and specific process conditions, aluminum and its alloys form a layer of oxide film on aluminum products (anode) under the action of applied current. The oxide film has protective, decorative and some other functional properties.We can also do many kinds of other surface treatment.
5.Quality control:Strict standards on quality control to insure your benifits.
1.Machine frames, shelf, door, industrial automation equipment, table for factory and office, storage racks,storage containers, ladders.
2.Convenient construction: Owned modularity, multifunction, You can quickly construct an ideal equipment forgarment and no need complex design and processing.
3.Beautiful and practical model: Light and high stiffness, Simple and beautiful appearance without painting.
4.High scalability: Unique design for T type and fillister. There is no need to remove aluminium profileswhen installing components but nut and screw can be installed in any position. Refitting equipment is simple and quick.
2.Convenient construction: Owned modularity, multifunction, You can quickly construct an ideal equipment forgarment and no need complex design and processing.
3.Beautiful and practical model: Light and high stiffness, Simple and beautiful appearance without painting.
4.High scalability: Unique design for T type and fillister. There is no need to remove aluminium profileswhen installing components but nut and screw can be installed in any position. Refitting equipment is simple and quick.
Comments
Post a Comment